 
PHASE 3 SMALL DOG KIT - $149.50
About 3.5 inches "nose to rump"
Feel like you're chasing your own tail in the search for a miniature dog
armature? You won't find a better ball-and-socket Chihuahua anywhere than
this little fellow. This is what Jack Russell had in mind when he set out
to breed the tiny terrier of his dreams. The Armaverse Phase 3 Small Dog is
filled with personality and is an ideal partner to the Phase 3 Humature.
Or pair this energetic canine with a Large Dog kit and watch "Chester" drive
"Spike" crazy! The Phase 3 Small Dog can be animated to
howl, dig, fetch and stay with the personality of a real dog. Due to its
tiny size, the Small Dog is not as anatomically correct as the Medium and Large
Dogs, but is imminently posable and can mimic all the movements of a real pooch.
Three different lengths of screws are provided for flexibility in the hip and
shoulder widths.
The Phase 3 Small Dog Kit includes everything you need to start animating
immediately.
Your new kit will include...
|
-
20
3-hole plates
-
4 Diamond plates
-
7 DB-1
-
7 Ball bearings
-
23
Lock washers
-
23 Hex nuts
-
23 2-stack screws
-
4 3-stack
screws
-
4 4-stack
screws
-
4
Tie-down screws*
-
4 Tie-down nuts*
-
9
Threaded ball bearings
-
2 Tail
assembly units
-
Instructions
|
|
Every Phase 3 Dog kit includes two
pre-assembled tail units which combine a threaded ball with flexible armature
wire.
Your Armaverse Phase 3 kit will arrive in a special-edition,
all-metal package commemorating the launch of the Phase 3 armature line.
|
|
* To provide a solid base for animating, most animators choose to
tie-down the armature while working by attaching the character’s feet, hands, claws or paws to the set floor. All the necessary hardware and instructions are included with each kit.
All
you'll need:
1 small
pair of pliers
1 Phillips-head screwdriver |
|
Check out the Phase 3 Individual Pieces
page for a closer look at all Armaverse Phase 3 parts.
Please
visit the PDF page if you have any questions about
Armaverse part dimensions. |
